Standing seam metal roof on a Broward County Florida home

The True Cost of a Metal Roof Installation in Broward County

When people call Broward County Roofing Contactors, here’s how these calls usually go. Someone says their roof is worn out and they’ve been thinking about metal. Then, before we’ve even talked about the roof, they ask what it’ll run them. Fair. I’d ask the same thing. 

The problem is that the prices you find online are all over the map. $10,000 on one site, $60,000 on the next. You can’t budget with that. So this is the longer answer, the one I’d give you standing in your driveway.

What Most People Pay

Say your roof measures about 2,000 square feet. For that house, a metal roof in 2026 mostly costs between $20,000 and $40,000. Small roof, plain panels? You might land under that. Big roof, fancy panels? You’ll go over.

Per square foot, you’re looking at roughly $7 to $18 for the full job. Three things decide where you fall. What kind of metal you choose. How simple or complicated the roof is. And what’s hiding under the old roof, which nobody knows until it’s off.

Treat all of this as a rough guide. Metal prices move during the year. To get your actual number, somebody has to get up there and look.

Picking a Panel

Of all the choices on a metal roof, the panel changes the bill the most. Here’s the short comparison.

Roof TypeInstalled Cost per Sq FtRough Total for 2,000 Sq FtTypical Lifespan
Exposed-fastener steel panels$7 – $12$14,000 – $24,00025 – 40 years
Standing seam steel$10 – $18$20,000 – $36,00040 – 60 years
Standing seam aluminum$12 – $18$24,000 – $36,00040 – 60 years
Metal shingles or tile-look panels$12 – $20$24,000 – $40,00040 – 50 years

Rounded ranges. Tear-off and wood repairs can be extra.

Exposed-fastener is the cheapest way in. You can see the screws, and every one has a rubber washer under its head. After years of Florida sun those washers go dry and brittle, so somebody needs to check them now and then.

Standing seam panels snap together on raised ridges, and the screws are hidden. You pay more up front. In return, there are fewer weak spots for rain to find.

Aluminum doesn’t rust, period. For a house near salt water, that can be worth the extra.

Then there are metal shingles and tile-look panels. They’re for folks who want a metal roof’s strength but not the barn-roof look.

A Sample Budget

Numbers are easier to follow with an example. I made this one up to show how a bill stacks up, so don’t hold it against your own quote.

Think of a house with 2,000 square feet of roof area and standing seam steel panels.

  • Panels, trimming, and installation cost around $12 per square foot: $24,000
  • Existing roof demolition cost around $2 per square foot: $4,000
  • Little extra money for rotting wood found below the current roof: $1,500 to $2,500
  • Licenses and inspections cost a few hundred to a couple of thousands of dollars

Add it up and you’re near $30,000 to $33,000. Switch to exposed-fastener panels and the first line drops by several thousand. Add a lot of angles to the roof and it climbs.

What Is in the Price

Plenty of people think they’re paying for sheets of metal and that’s it. Not really. A good chunk of your money goes to stuff you’ll never look at again.

Take the underlayment, the layer under the metal. If water ever gets past a panel, that layer is what stops it from reaching your attic. Then there’s flashing, the bent metal that seals around vents, chimneys, and edges. And then labor, which is a big share of any roof bill.

When quotes come in, check that each one covers the same things. A low number that skips tear-off or the permit only looks low. The rest of the bill shows up later.

Why Our County Plays by Tougher Rules

Broward is inside Florida’s High-Velocity Hurricane Zone. That means the building code here is stricter than in most places, and you feel it in your roof bill in three ways.

First, the products need approval for our zone. A lot of panels sold elsewhere don’t qualify. Second, screws and clips go in closer together, so strong wind has less to grab. Third, inspectors look closely at the finished work.

Roofer installing metal panels while a building inspector reviews the work in Broward County 

Does it cost more? Sure. However, these requirements were set through experience, and a roof constructed according to them has a higher chance of survival during future storms.

The weather conditions also include regular daily weather phenomena, such as high temperature in August and heavy rains at 3 p.m. Finishes designed for such conditions have higher costs but last longer.

Complex Roofs, Higher Costs

Roofing companies use squares as units of measurement, where one square equals 100 square feet. The area of your roof will always be larger than the one of your floor plan because of its sloping.

Size isn’t the whole story, though. Take two houses with the same 2,000 square feet of roof. One has two big flat sides. The other has lots of corners, a couple of valleys, a skylight, and a tall chimney. The crew on the second house spends far more time cutting and sealing. That time ends up on your bill.

The Wood You Can’t See

When the old roof comes off, we finally see the wood deck. This is where surprises live. A slow leak in our wet air can turn plywood soft, and you may never see a stain on your ceiling.

Bad boards have to come out before metal goes on. A few boards is no big deal. A large patch can add real money.

That’s why we start with an inspection. We look in the attic for dark spots and old water marks, and we press on the deck where we can reach it. Then we put in writing how any bad wood will be charged. Nobody should get a surprise call halfway through the job.

People sometimes ask if the metal can go right over old shingles. It depends on local rules and how the old roof looks. Often a full tear-off is the safer call. We check each house on its own.

Permits and License Checks

Metal roofing in Broward needs a permit. The fee depends on the job, and an inspector comes out when the work is done. You also need the product approval papers for your panels.

A good roofer handles all of that. If someone tells you to skip the permit to save a few bucks, walk away. It can cause trouble with your insurance down the road.

One more thing. Look up your contractor’s license on the state DBPR website. Two minutes, tops.

Small Costs That Add Up

Some extras tend to pop up late, so ask about them early. Gutters and skylights may have to come off and go back on. Solar panels need a pro to remove and reinstall them. Rotted fascia or soffit boards often show up along the roof edge. Attic vents sometimes need an upgrade. Premium colors cost a bit more. And if you have an HOA, getting your color approved can take a while.

None of these will wreck a budget alone. Together, they can move the total by a few thousand dollars.

Metal vs. Shingles Over Time

Metal costs more on day one. No getting around that. What matters is what happens over the next few decades.

In our heat, shingles often last 15 to 25 years. A good metal roof can go 40 or more. Over 50 years you might buy shingles two or three times.

Insurance can help too. Many Florida insurers give discounts for wind-resistant roofs. The amount depends on the company. A wind mitigation inspection shows what your roof qualifies for.

Some owners also notice lower cooling bills with light, reflective metal. It varies from house to house, so I won’t throw out a number.

Is metal right for everyone? Not always. If you’re selling soon or money is tight, a solid shingle roof can be the smarter buy. We’ll say so if that’s your case.

How to Judge a Quote

Lay two or three quotes side by side and read them line by line. Same panel and metal thickness? Tear-off and cleanup included? How is bad wood charged? Is the permit in there? What underlayment are they using? But what is covered by the warranties? The paint warranty is a separate thing from the workmanship warranty.

Also check the financing terms. Watch out for roofers who want to have most of the money before starting the work. And if the quote is significantly lower than all the others, there is certainly something missing. Find out what it is.

From First Call to Final Sweep

While each case is unique, our metal roofing project goes through the following steps:

  1. Roof and attic inspection and measurement.
  2. You will get a written quote with specific figures.
  3. We pull the permit and handle the product approval papers.
  4. The old roof comes off, and bad wood gets replaced.
  5. Underlayment and flashing go down.
  6. The metal panels are fastened the way the code says.
  7. The county inspector signs off, and we clean up your yard.

Most jobs take a few days up to a couple of weeks. Summer rain can slow things down, and that’s fine. We’d rather lose a day than trap water under new metal.

When Repair Beats Replace

Some roofs don’t need a full redo. A couple of leaks or some loose flashing can often be fixed for far less. If a storm just rolled through and water is coming in, we also do emergency leak repair and tarping so your house stays dry until the real fix is ready.

That’s why the inspection comes first. We’d rather give you honest news than sell you a bigger job. And if your roof really is finished, we’ll show you photos of your own roof so you can see why.

FAQs

Will a metal roof really last 50 years here?

It can, if it’s standing seam and it’s put on right. Exposed-fastener roofs usually give you 25 to 40 years, because those screw washers tire out first. Either way, a quick check every year or two, plus a look after big storms, helps a lot.

What happens to a metal roof in a hurricane?

A good approved system holds on well, because that’s how it’s built and tested. But I won’t tell you if any roof is hurricane-proof. A flying branch can still dent a panel. How tight it’s fastened and how clean the work is matter more than the brand name.

Do I hear every raindrop on metal?

Not with a solid deck and proper underlayment under it. Most folks say it sounds about like any other roof. A heavy storm is loud on every roof, to be fair.

Is the insurance discount real?

Often, yes. Lots of Florida insurers take money off for wind-resistant roofs. How much depends on your company. Call your agent, and get a wind mitigation inspection done after the install so your roof’s features are on paper.

We live near the water. Will salt wreck the metal?

Coated steel does fine when the coating is good quality. Aluminum doesn’t rust at all, so it’s a strong pick near salt water. Rinse the roof with a hose once in a while and the salt washes right off.

My ceiling stain is growing. Should I wait for the install?

No. Deal with the water first. A temporary tarp or a quick leak repair can protect your home in a day or so. Then you can plan the metal roof installation without panic.

Get a Price for Your Own Roof

Online numbers only go so far. Your roof’s size, shape, and age decide what you really pay. The best first move is a roof inspection and a written quote.

Broward County Roofing Contractors helps homeowners across the county with metal roof installation, roof replacement, roof repair, roof inspections, and emergency leak repair. Call us, ask whatever you want, and see your options in plain numbers.